主要特征 FEATURES
·應用范圍：電信通信設備、工程機械、電瓶車、電動叉車、汽車、火車、船舶、不間斷電源等電控系統
Application: For Electric Control System of Communication Power Supply、Engineering Machine、Electro-motion Forklift、Motor Car、Train、Watercraft and UPS etc.
02 特殊說明 Special Instructions
產品線圈采取正、負脈沖激勵（1、2 端），激勵時間 200ms≤t≤1s，線圈
不能持續長期通電，操作頻率不得超過每分鐘 6 次，并且脈沖應是方波，正脈
沖使觸點閉合，負脈沖使觸點斷開，線圈去激勵后，接觸器觸點狀態由產品內
的永久磁鐵保持。
Product coil is excited by positive and negative pulse(1,2points), 200ms≤t≤1s,Long time continuous energizing is not allowed, Operation frequency no more than 6time/min,lt`s square pulse and positive pulse makes the contact close while negative pulse makes the contact open,After the excitation,the permanent magnet in product keeps the state of the contact。
03 使用條件 Use conditions required
序號
NO. |
參數名稱Parameters |
產品代號Product code |
| ZJ80C、ZJ100C系列series |
| 1 |
環境溫度Ambient temperature: |
(-40～+60)℃ |
| 2 |
相對濕度Relative humidity: |
+20℃達98%(Up to 98%at+20℃) |
| 3 |
固定處的振動
Vibration freq .at the fixed position: |
(10～200)Hz、加速度≤3.5g
(10～200)Hz、Acceleration≤3.5g |
| 4 |
沖擊 Shocking |
(60～100)次/分、加速度≤4g
(60～100)time/minute、Acceleration≤4g |
5 |
安裝位置Mounting directions |
任意Optional |
04 簡要技術數據 Basic technical data
序號 |
參數名稱Parameters |
產品代號Product code |
| ZJ80C、ZJ100C系列series |
| 1 |
線圈額定電壓
Rated coil volt(VDC) |
12 |
24 |
30 |
48 |
60 |
80 |
120 |
| 2 |
線圈電流Coil Current |
≤700mA |
| 3 |
最小脈寬度Minimum pulse width |
200mS |
| 4 |
(20±5)℃下，冷態動作電壓(V)
Operating volt in cold state at
(20±5)℃(V) |
吸合
Pick-up |
線圈額定電壓的(20～60)% |
釋放
Release |
線圈額定電壓的(20～60)%
Rated coil volt |
| 5 |
電源電壓波動范圍
Fluctuating range of power supply
volt |
(85%～110%)額定電壓
85%～110%) rated volt |
| 6 |
主觸點電路額定電壓
Rated volt of contact circuit (V DC) |
60 VDC |
| 7 |
主觸點電路額定負載電流Rated
load current of contact circuit (A) |
80A、100A |
| 8 |
50A負載下主觸點接觸壓降
Contact volt drop of contact at
50A: |
≤50mV |
| 9 |
抗電強度Puncture(volt)strength |
50Hz,1000VAC,1min |
| 10 |
觸點最大通斷能力
Max.make-break ability of
contact |
通斷1次4倍額定負載電流，通電時間(Connect four
times rated load current,make and break once
for )5ms |
| 11 |
電壽命Electric life |
50.000次Ops |
| 12 |
機械壽命Mechanical life |
100.000次Ops |
| 13 |
工作規范Working duty |
連續Continuous |
05 外型安裝圖 configurational mounting diagram
